DX-105 DC Gauss Meter

 DX-105 DC Gauss Meter-

Instruction                                            

 Instruction

DX-105 Gaussmeter is a desktop gaussmeter.Which is based on he latest progress of the the Hall Effect magnetic field measuring instrument. Adapt the high stability constant current source circuit technology to design and manufacture.

Test probe adapts imported GaAs linear Hall-chip, the difference between any two probes is small,

which can be replaced directly when it is damaged. DX-105 Gaussmeter is an ideal DC magnetic field test instrument.

Function

 Function

1. DC magnetic field measurement;

2. DC magnetic field distribution measurement;

3. The magnetizing measurement of the permanent magnets;

4. The magnetic field distribution measurement inside the DC coils;

5. The air gap magnetic field measurement of DC electromagnets. 

  Features                                     ParametersPa 

Features                                                                   Parameters

1. Direct reading of measured magnetic field                    1.  Power: 220V±10V/0.5A,50Hz

2.  DC magnetic polarity judgement                                               2.   Range: 0-±300Gs, 0-±3KGs, 0-±30KGs three gears

3.  One key of auto zero                                                                      3.  Accurancy: better than 1.0%(full scale)

4.  One key of unit switch                                                                   4. Resolution:0.1Gs

5.  Setting the maximum and minimun values of                         5. Operating environment: Temperature: 0°C~50°C,

     measured magnetic field;                                                                Humidity: 35~80%

6. Hints when exceeding max. and min. values;                           6.  Diemension: 300mm×280mm×96mm

7. With RS232 interface and software, connected with PC.    7.   Weight: 3.2kg

Probe

Optional Probes

DX-105 Gaussmeter can be matched with one of following three probes according to actual measurement:
1. Axial probe: L60mm, Dia. 3.0mm, Senstive area: 0.5mm×0.5mm;
2. Transverse probe (Standard probe): L60mm, W3.5mm, T0.6mm, Senstive area: 0.5mm×0.5mm;
3. Superthin probe: L40mm, W1.2mm, T0.35mm, Senstive area: 0.25mm×0.25mm.